This post is just to communicate with others the current state of our bathroom vanity in an effort to raise the sinks a few inches.
Overview
This shows the sink counter from the side and from the bottom. As you can see, it is entirely hung from the wall. There are no supports (in the bottom picture) that touch the floor.
The plumbing
Next there is an image of the plumbing underneath. You can see that the cabinet was attached to the walls and the holes drilled before the water was turned on. Perhaps a deep socket drill could widen the holes so that cabinet could be taken off without turning off the water?
Mounting
Here you can see that they have some screws that hold the unit to the wall. I suspect there is a mounting system very similar to those for kitchen cabinets behind this that is in place to hold it?
I saw quite a few “white dots” covering up holes, but almost none of them had any screws in them that I could see.
I hope this helps.
Thanks – Karl